Commit Message
Rene Hertell wrote:
> Hi Guys,
>
> I remember that someone had some kind of patch for increasing the
> OSD-resoluion in VDR. I just can't find that post that mentioned about
> that...
>
> Could anyone post a link to that site that had that patch.. I would like
> to try that out :-)
>
> Regards,
>
> René
>
> _______________________________________________
> vdr mailing list
> vdr@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>
The patches are here: http://www.netholic.com/viewtopic.php?t=1622
Unfortunately, if you do not speak Finnish, it might a bit hard to
follow that thread....
What comes to VDR, you just need to change the defines for MAXOSDHEIGHT
and -WIDTH in config.h (this is against 1.4.3-4):
-Petri
Comments
Petri Helin wrote:
> The patches are here: http://www.netholic.com/viewtopic.php?t=1622
> Unfortunately, if you do not speak Finnish, it might a bit hard to
> follow that thread....
Kiitos! Thanks!
Finnish is no problem for me :-)
Terveisin,
René
@@ -41,9 +41,9 @@
#define MAXLIFETIME 99
#define MINOSDWIDTH 480
-#define MAXOSDWIDTH 672
+#define MAXOSDWIDTH 1280
#define MINOSDHEIGHT 324
-#define MAXOSDHEIGHT 567
+#define MAXOSDHEIGHT 720
#define MaxFileName 256
#define MaxSkinName 16
In order to increase the resolution of the OSD you should use
xineliboutput-plugin and patch it like this (patch will most likely be
broken because it is inline):
@@ -155,7 +155,12 @@
m_Device = Device;
m_Shown = false;
- CmdSize(m_Device, 0, 720, 576);
+
+ if(Setup.OSDWidth + (2*Setup.OSDLeft) > 720 || Setup.OSDHeight +
(2*Setup.OSDTop) > 576) {
+ CmdSize(m_Device, 0, Setup.OSDWidth + (2*Setup.OSDLeft),
Setup.OSDHeight + (2*Setup.OSDTop));
+ } else {
+ CmdSize(m_Device, 0, 720, 576);
+ }
}
cXinelibOsd::~cXinelibOsd()
@@ -182,11 +187,11 @@
if(Result == oeOk)
m_Shown = false;
- if(Left() + Width() > 720 || Top() + Height() > 576) {
+ if(2*Left() + Width() > 720 || 2*Top() + Height() > 576) {
LOGDBG("Detected HD OSD, size > %dx%d, using setup values %dx%d",
- Left() + Width(), Top() + Height(),
- Setup.OSDWidth, Setup.OSDHeight);
- CmdSize(m_Device, 0, Setup.OSDWidth, Setup.OSDHeight);
+ 2*Left() + Width(), 2*Top() + Height(),
+ Setup.OSDWidth + (2*Setup.OSDLeft), Setup.OSDHeight +
(2*Setup.OSDTop));
+ CmdSize(m_Device, 0, Setup.OSDWidth + (2*Setup.OSDLeft),
Setup.OSDHeight + (2*Setup.OSDTop));
} else {
CmdSize(m_Device, 0, 720, 576);
}
After that you should change the resolution via VDR's setup menu. Note
that menu plugins are not really compatible with the larger resolution,
like for example the ttxtsubs plugin unless you make some changes in to
them. Here is an example fix for the ttxtsubs plugin:
@@ -332,13 +332,13 @@
enum {
SCREENLEFT = 0,
- SCREENRIGHT = 719,
+ SCREENRIGHT = 1280,
SCREENTOP = 150,
- SCREENBOTTOM = 575,
+ SCREENBOTTOM = 720,
SIDEMARGIN = 125,
- BOTNORM = 540,
- BOTLETTERBOX = 482,
+ BOTNORM = 640,
+ BOTLETTERBOX = 520,
ROWINCR = 43,
ROWH = 34,