OMAP_VOUT: Fix build break caused by update_mode removal in DSS2
Commit Message
The DSS2 driver does not support the configuration of the update_mode of a
panel anymore. Remove the setting of update_mode done in omap_vout_probe().
Ignore configuration of TE since omap_vout driver doesn't support manual update
displays anyway.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/media/video/omap/omap_vout.c | 13 -------------
1 files changed, 0 insertions(+), 13 deletions(-)
Comments
Op 5 aug 2011, om 09:19 heeft Archit Taneja het volgende geschreven:
> The DSS2 driver does not support the configuration of the
> update_mode of a
> panel anymore. Remove the setting of update_mode done in
> omap_vout_probe().
> Ignore configuration of TE since omap_vout driver doesn't support
> manual update
> displays anyway.
>
> Signed-off-by: Archit Taneja <archit@ti.com>
Tested-by: Koen Kooi <koen@dominion.thruhere.net>
> ---
> drivers/media/video/omap/omap_vout.c | 13 -------------
> 1 files changed, 0 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/
> video/omap/omap_vout.c
> index b5ef362..b3a5ecd 100644
> --- a/drivers/media/video/omap/omap_vout.c
> +++ b/drivers/media/video/omap/omap_vout.c
> @@ -2194,19 +2194,6 @@ static int __init omap_vout_probe(struct
> platform_device *pdev)
> "'%s' Display already enabled\n",
> def_display->name);
> }
> - /* set the update mode */
> - if (def_display->caps &
> - OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
> - if (dssdrv->enable_te)
> - dssdrv->enable_te(def_display, 0);
> - if (dssdrv->set_update_mode)
> - dssdrv->set_update_mode(def_display,
> - OMAP_DSS_UPDATE_MANUAL);
> - } else {
> - if (dssdrv->set_update_mode)
> - dssdrv->set_update_mode(def_display,
> - OMAP_DSS_UPDATE_AUTO);
> - }
> }
> }
>
> --
> 1.7.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
> -----Original Message-----
> From: Taneja, Archit
> Sent: Friday, August 05, 2011 12:49 PM
> To: Hiremath, Vaibhav; linux-media@vger.kernel.org
> Cc: koen@dominion.thruhere.net; Valkeinen, Tomi; linux-
> omap@vger.kernel.org; Taneja, Archit
> Subject: [PATCH] [media] OMAP_VOUT: Fix build break caused by update_mode
> removal in DSS2
>
> The DSS2 driver does not support the configuration of the update_mode of a
> panel anymore. Remove the setting of update_mode done in omap_vout_probe().
> Ignore configuration of TE since omap_vout driver doesn't support manual
> update
> displays anyway.
>
> Signed-off-by: Archit Taneja <archit@ti.com>
> ---
> drivers/media/video/omap/omap_vout.c | 13 -------------
> 1 files changed, 0 insertions(+), 13 deletions(-)
>
[Hiremath, Vaibhav]
Acked-by: Vaibhav Hiremath <hvaibhav@ti.com>
Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
Since this is bug fix (results in build failure), I will queue up for next rc.
Thanks,
Vaibhav
> diff --git a/drivers/media/video/omap/omap_vout.c
> b/drivers/media/video/omap/omap_vout.c
> index b5ef362..b3a5ecd 100644
> --- a/drivers/media/video/omap/omap_vout.c
> +++ b/drivers/media/video/omap/omap_vout.c
> @@ -2194,19 +2194,6 @@ static int __init omap_vout_probe(struct
> platform_device *pdev)
> "'%s' Display already enabled\n",
> def_display->name);
> }
> - /* set the update mode */
> - if (def_display->caps &
> - OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
> - if (dssdrv->enable_te)
> - dssdrv->enable_te(def_display, 0);
> - if (dssdrv->set_update_mode)
> - dssdrv->set_update_mode(def_display,
> - OMAP_DSS_UPDATE_MANUAL);
> - } else {
> - if (dssdrv->set_update_mode)
> - dssdrv->set_update_mode(def_display,
> - OMAP_DSS_UPDATE_AUTO);
> - }
> }
> }
>
> --
> 1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
@@ -2194,19 +2194,6 @@ static int __init omap_vout_probe(struct platform_device *pdev)
"'%s' Display already enabled\n",
def_display->name);
}
- /* set the update mode */
- if (def_display->caps &
- OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
- if (dssdrv->enable_te)
- dssdrv->enable_te(def_display, 0);
- if (dssdrv->set_update_mode)
- dssdrv->set_update_mode(def_display,
- OMAP_DSS_UPDATE_MANUAL);
- } else {
- if (dssdrv->set_update_mode)
- dssdrv->set_update_mode(def_display,
- OMAP_DSS_UPDATE_AUTO);
- }
}
}