media: ipu-bridge: Add missing acpi_dev_put() in ipu_bridge_get_ivsc_acpi_dev()

Message ID 0e8fa862e2d3da5897d0f895322d469e7d5aa052.1695979848.git.geert+renesas@glider.be (mailing list archive)
State Accepted
Delegated to: Sakari Ailus
Headers
Series media: ipu-bridge: Add missing acpi_dev_put() in ipu_bridge_get_ivsc_acpi_dev() |

Commit Message

Geert Uytterhoeven Sept. 29, 2023, 9:31 a.m. UTC
  In ipu_bridge_get_ivsc_acpi_dev(), the "ivsc_adev" acpi_device pointer
from the outer loop is handed over to the caller, which takes proper
care of its reference count.
However, the "consumer" acpi_device pointer from the inner loop is lost,
without decrementing its reference count.

Fix this by adding the missing call to acpi_dev_put().

Fixes: c66821f381aed2c7 ("media: pci: intel: Add IVSC support for IPU bridge driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Compile-tested only.

This driver really likes nesting loops: the above inner loop is actually
5 levels deep, of which 3 levels use for_each_acpi_*().  And all of that
is done twice:

ipu_bridge_init
    ipu_bridge_ivsc_is_ready
        for (i = 0; i < ARRAY_SIZE(ipu_supported_sensors); i++)
            for_each_acpi_dev_match(sensor_adev, cfg->hid, NULL, -1)
                for (i = 0; i < ARRAY_SIZE(ivsc_acpi_ids); i++)
                    for_each_acpi_dev_match(ivsc_adev, acpi_id->id, NULL, -1)
                        for_each_acpi_consumer_dev(ivsc_adev, consumer)

    ipu_bridge_connect_sensors
        for (i = 0; i < ARRAY_SIZE(ipu_supported_sensors); i++)
                for_each_acpi_dev_match(adev, cfg->hid, NULL, -1)
                    for (i = 0; i < ARRAY_SIZE(ivsc_acpi_ids); i++)
                        for_each_acpi_dev_match(ivsc_adev, acpi_id->id, NULL, -1)
                            for_each_acpi_consumer_dev(ivsc_adev, consumer)
---
 drivers/media/pci/intel/ipu-bridge.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
  

Comments

Andy Shevchenko Oct. 1, 2023, 9:25 a.m. UTC | #1
On Fri, Sep 29, 2023 at 11:31:33AM +0200, Geert Uytterhoeven wrote:
> In ipu_bridge_get_ivsc_acpi_dev(), the "ivsc_adev" acpi_device pointer
> from the outer loop is handed over to the caller, which takes proper
> care of its reference count.
> However, the "consumer" acpi_device pointer from the inner loop is lost,
> without decrementing its reference count.
> 
> Fix this by adding the missing call to acpi_dev_put().

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
  

Patch

diff --git a/drivers/media/pci/intel/ipu-bridge.c b/drivers/media/pci/intel/ipu-bridge.c
index 1bde8b6e0b1121a8..e38198e259c03ce9 100644
--- a/drivers/media/pci/intel/ipu-bridge.c
+++ b/drivers/media/pci/intel/ipu-bridge.c
@@ -107,8 +107,10 @@  static struct acpi_device *ipu_bridge_get_ivsc_acpi_dev(struct acpi_device *adev
 		for_each_acpi_dev_match(ivsc_adev, acpi_id->id, NULL, -1)
 			/* camera sensor depends on IVSC in DSDT if exist */
 			for_each_acpi_consumer_dev(ivsc_adev, consumer)
-				if (consumer->handle == handle)
+				if (consumer->handle == handle) {
+					acpi_dev_put(consumer);
 					return ivsc_adev;
+				}
 	}
 
 	return NULL;