[-next,09/13] media: xilinx: csi2rxss: Switch to use dev_err_probe() helper
Commit Message
In the probe path, dev_err() can be replace with dev_err_probe()
which will check if error code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
---
drivers/media/platform/xilinx/xilinx-csi2rxss.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
Comments
Hi Yang,
Thank you for the patch.
On Thu, Sep 15, 2022 at 11:03:20PM +0800, Yang Yingliang wrote:
> In the probe path, dev_err() can be replace with dev_err_probe()
> which will check if error code is -EPROBE_DEFER.
>
> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> drivers/media/platform/xilinx/xilinx-csi2rxss.c | 8 +++-----
> 1 file changed, 3 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/media/platform/xilinx/xilinx-csi2rxss.c b/drivers/media/platform/xilinx/xilinx-csi2rxss.c
> index 29b53febc2e7..080e2483cc92 100644
> --- a/drivers/media/platform/xilinx/xilinx-csi2rxss.c
> +++ b/drivers/media/platform/xilinx/xilinx-csi2rxss.c
> @@ -976,11 +976,9 @@ static int xcsi2rxss_probe(struct platform_device *pdev)
> /* Reset GPIO */
> xcsi2rxss->rst_gpio = devm_gpiod_get_optional(dev, "video-reset",
> GPIOD_OUT_HIGH);
> - if (IS_ERR(xcsi2rxss->rst_gpio)) {
> - if (PTR_ERR(xcsi2rxss->rst_gpio) != -EPROBE_DEFER)
> - dev_err(dev, "Video Reset GPIO not setup in DT");
> - return PTR_ERR(xcsi2rxss->rst_gpio);
> - }
> + if (IS_ERR(xcsi2rxss->rst_gpio))
> + return dev_err_probe(dev, PTR_ERR(xcsi2rxss->rst_gpio),
> + "Video Reset GPIO not setup in DT");
>
> ret = xcsi2rxss_parse_of(xcsi2rxss);
> if (ret < 0)
On Mon, Sep 19, 2022 at 04:58:54PM +0300, Laurent Pinchart wrote:
> Hi Yang,
>
> Thank you for the patch.
>
> On Thu, Sep 15, 2022 at 11:03:20PM +0800, Yang Yingliang wrote:
> > In the probe path, dev_err() can be replace with dev_err_probe()
> > which will check if error code is -EPROBE_DEFER.
> >
> > Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> > ---
> > drivers/media/platform/xilinx/xilinx-csi2rxss.c | 8 +++-----
> > 1 file changed, 3 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/media/platform/xilinx/xilinx-csi2rxss.c b/drivers/media/platform/xilinx/xilinx-csi2rxss.c
> > index 29b53febc2e7..080e2483cc92 100644
> > --- a/drivers/media/platform/xilinx/xilinx-csi2rxss.c
> > +++ b/drivers/media/platform/xilinx/xilinx-csi2rxss.c
> > @@ -976,11 +976,9 @@ static int xcsi2rxss_probe(struct platform_device *pdev)
> > /* Reset GPIO */
> > xcsi2rxss->rst_gpio = devm_gpiod_get_optional(dev, "video-reset",
> > GPIOD_OUT_HIGH);
> > - if (IS_ERR(xcsi2rxss->rst_gpio)) {
> > - if (PTR_ERR(xcsi2rxss->rst_gpio) != -EPROBE_DEFER)
> > - dev_err(dev, "Video Reset GPIO not setup in DT");
> > - return PTR_ERR(xcsi2rxss->rst_gpio);
> > - }
> > + if (IS_ERR(xcsi2rxss->rst_gpio))
> > + return dev_err_probe(dev, PTR_ERR(xcsi2rxss->rst_gpio),
> > + "Video Reset GPIO not setup in DT");
Actually, while at it, could you add the missing \n at the end of the
message ?
> >
> > ret = xcsi2rxss_parse_of(xcsi2rxss);
> > if (ret < 0)
@@ -976,11 +976,9 @@ static int xcsi2rxss_probe(struct platform_device *pdev)
/* Reset GPIO */
xcsi2rxss->rst_gpio = devm_gpiod_get_optional(dev, "video-reset",
GPIOD_OUT_HIGH);
- if (IS_ERR(xcsi2rxss->rst_gpio)) {
- if (PTR_ERR(xcsi2rxss->rst_gpio) != -EPROBE_DEFER)
- dev_err(dev, "Video Reset GPIO not setup in DT");
- return PTR_ERR(xcsi2rxss->rst_gpio);
- }
+ if (IS_ERR(xcsi2rxss->rst_gpio))
+ return dev_err_probe(dev, PTR_ERR(xcsi2rxss->rst_gpio),
+ "Video Reset GPIO not setup in DT");
ret = xcsi2rxss_parse_of(xcsi2rxss);
if (ret < 0)