diff mbox series

[1/4] media: dt-bindings: media: Document RZ/G2L CSI-2 block

Message ID 20220801214718.16943-2-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive)
State Superseded
Headers
Series Add driver for CSI2 and CRU modules found on Renesas RZ/G2L SoC |

Commit Message

Prabhakar Mahadev Lad Aug. 1, 2022, 9:47 p.m. UTC 
  Document the CSI-2 block which is part of CRU found in Renesas
RZ/G2L SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
RFC v2 -> v1
* Fixed review comments pointed by Rob and Jacopo.

RFC v1 -> RFC v2
* New patch
---
 .../bindings/media/renesas,rzg2l-csi2.yaml    | 149 ++++++++++++++++++
 1 file changed, 149 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml

Comments

Krzysztof Kozlowski Aug. 2, 2022, 7:36 a.m. UTC | #1 
On 01/08/2022 23:47, Lad Prabhakar wrote:
> Document the CSI-2 block which is part of CRU found in Renesas
> RZ/G2L SoC.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> RFC v2 -> v1

Too many "media" in the subject prefixes.

> * Fixed review comments pointed by Rob and Jacopo.
> 
> RFC v1 -> RFC v2
> * New patch
> ---
>  .../bindings/media/renesas,rzg2l-csi2.yaml    | 149 ++++++++++++++++++
>  1 file changed, 149 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> new file mode 100644
> index 000000000000..f82f88c096df
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> @@ -0,0 +1,149 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright (C) 2022 Renesas Electronics Corp.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/renesas,rzg2l-csi2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas RZ/G2L (and alike SoC's) MIPI CSI-2 receiver
> +
> +maintainers:
> +  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> +
> +description:
> +  The CSI-2 receiver device provides MIPI CSI-2 capabilities for the Renesas RZ/G2L
> +  (and alike SoCs). MIPI CSI-2 is part of the CRU block which is used in conjunction
> +  with the Image Processing module, which provides the video capture capabilities.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - enum:
> +              - renesas,r9a07g044-csi2       # RZ/G2{L,LC}
> +              - renesas,r9a07g054-csi2       # RZ/V2L
> +          - const: renesas,rzg2l-csi2
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-names:
> +    const: csi2_link
> +
> +  clocks:
> +    items:
> +      - description: Internal clock for connecting CRU and MIPI
> +      - description: CRU Main clock
> +      - description: CPU Register access clock
> +
> +  clock-names:
> +    items:
> +      - const: sysclk
> +      - const: vclk
> +      - const: pclk
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  resets:
> +    items:
> +      - description: CRU_CMN_RSTB reset terminal
> +
> +  reset-names:
> +    const: cmn-rstb
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port node, single endpoint describing the CSI-2 transmitter.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +                items:
> +                  maximum: 4
> +
> +            required:
> +              - clock-lanes
> +              - data-lanes
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output port node, Image Processing block connected to the CSI-2 receiver.
> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - resets
> +  - reset-names
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/r9a07g044-cpg.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    csi20: csi2@10830400 {

Node name just "csi"

https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation


> +            compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2";
> +            reg = <0x10830400 0xfc00>;

Please use 4-space indentation for example DTS.

> +            interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
> +            clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>,
> +                     <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
> +                     <&cpg CPG_MOD R9A07G044_CRU_PCLK>;
> +            clock-names = "sysclk", "vclk", "pclk";
> +            power-domains = <&cpg>;
> +            resets = <&cpg R9A07G044_CRU_CMN_RSTB>;
> +            reset-names = "cmn-rstb";
> +
> +            ports {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +
> +                    port@0 {
> +                            reg = <0>;
> +
> +                            csi2_in: endpoint {
> +                                    clock-lanes = <0>;
> +                                    data-lanes = <1 2>;
> +                                    remote-endpoint = <&ov5645_ep>;
> +                            };
> +                    };
> +
> +                    port@1 {
> +                            #address-cells = <1>;
> +                            #size-cells = <0>;
> +
> +                            reg = <1>;
> +
> +                            csi2cru: endpoint@0 {
> +                                    reg = <0>;
> +                                    remote-endpoint = <&crucsi2>;
> +                            };
> +                    };
> +            };
> +    };


Best regards,
Krzysztof
Lad, Prabhakar Aug. 3, 2022, 1:36 p.m. UTC | #2 
Hi Krzysztof,

Thank you for the review.

On Tue, Aug 2, 2022 at 8:36 AM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 01/08/2022 23:47, Lad Prabhakar wrote:
> > Document the CSI-2 block which is part of CRU found in Renesas
> > RZ/G2L SoC.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> > RFC v2 -> v1
>
> Too many "media" in the subject prefixes.
>
I followed the pattern seen by "git log --oneline
Documentation/devicetree/bindings/media/", but I do agree I can drop
the extra "media" after "dt-bindings:"

> > * Fixed review comments pointed by Rob and Jacopo.
> >
> > RFC v1 -> RFC v2
> > * New patch
> > ---
> >  .../bindings/media/renesas,rzg2l-csi2.yaml    | 149 ++++++++++++++++++
> >  1 file changed, 149 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> > new file mode 100644
> > index 000000000000..f82f88c096df
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> > @@ -0,0 +1,149 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +# Copyright (C) 2022 Renesas Electronics Corp.
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/renesas,rzg2l-csi2.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Renesas RZ/G2L (and alike SoC's) MIPI CSI-2 receiver
> > +
> > +maintainers:
> > +  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > +
> > +description:
> > +  The CSI-2 receiver device provides MIPI CSI-2 capabilities for the Renesas RZ/G2L
> > +  (and alike SoCs). MIPI CSI-2 is part of the CRU block which is used in conjunction
> > +  with the Image Processing module, which provides the video capture capabilities.
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - items:
> > +          - enum:
> > +              - renesas,r9a07g044-csi2       # RZ/G2{L,LC}
> > +              - renesas,r9a07g054-csi2       # RZ/V2L
> > +          - const: renesas,rzg2l-csi2
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  interrupt-names:
> > +    const: csi2_link
> > +
> > +  clocks:
> > +    items:
> > +      - description: Internal clock for connecting CRU and MIPI
> > +      - description: CRU Main clock
> > +      - description: CPU Register access clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: sysclk
> > +      - const: vclk
> > +      - const: pclk
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  resets:
> > +    items:
> > +      - description: CRU_CMN_RSTB reset terminal
> > +
> > +  reset-names:
> > +    const: cmn-rstb
> > +
> > +  ports:
> > +    $ref: /schemas/graph.yaml#/properties/ports
> > +
> > +    properties:
> > +      port@0:
> > +        $ref: /schemas/graph.yaml#/$defs/port-base
> > +        unevaluatedProperties: false
> > +        description:
> > +          Input port node, single endpoint describing the CSI-2 transmitter.
> > +
> > +        properties:
> > +          endpoint:
> > +            $ref: video-interfaces.yaml#
> > +            unevaluatedProperties: false
> > +
> > +            properties:
> > +              data-lanes:
> > +                minItems: 1
> > +                maxItems: 4
> > +                items:
> > +                  maximum: 4
> > +
> > +            required:
> > +              - clock-lanes
> > +              - data-lanes
> > +
> > +      port@1:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description:
> > +          Output port node, Image Processing block connected to the CSI-2 receiver.
> > +
> > +    required:
> > +      - port@0
> > +      - port@1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - clocks
> > +  - clock-names
> > +  - power-domains
> > +  - resets
> > +  - reset-names
> > +  - ports
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/r9a07g044-cpg.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +    csi20: csi2@10830400 {
>
> Node name just "csi"
>
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
>
OK will replace it with csi.

>
> > +            compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2";
> > +            reg = <0x10830400 0xfc00>;
>
> Please use 4-space indentation for example DTS.
>
Sure will do.

Cheers,
Prabhakar

> > +            interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
> > +            clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>,
> > +                     <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
> > +                     <&cpg CPG_MOD R9A07G044_CRU_PCLK>;
> > +            clock-names = "sysclk", "vclk", "pclk";
> > +            power-domains = <&cpg>;
> > +            resets = <&cpg R9A07G044_CRU_CMN_RSTB>;
> > +            reset-names = "cmn-rstb";
> > +
> > +            ports {
> > +                    #address-cells = <1>;
> > +                    #size-cells = <0>;
> > +
> > +                    port@0 {
> > +                            reg = <0>;
> > +
> > +                            csi2_in: endpoint {
> > +                                    clock-lanes = <0>;
> > +                                    data-lanes = <1 2>;
> > +                                    remote-endpoint = <&ov5645_ep>;
> > +                            };
> > +                    };
> > +
> > +                    port@1 {
> > +                            #address-cells = <1>;
> > +                            #size-cells = <0>;
> > +
> > +                            reg = <1>;
> > +
> > +                            csi2cru: endpoint@0 {
> > +                                    reg = <0>;
> > +                                    remote-endpoint = <&crucsi2>;
> > +                            };
> > +                    };
> > +            };
> > +    };
>
>
> Best regards,
> Krzysztof
Geert Uytterhoeven Aug. 18, 2022, 8:56 a.m. UTC | #3 
Hi Prabhakar,

On Mon, Aug 1, 2022 at 11:47 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> Document the CSI-2 block which is part of CRU found in Renesas
> RZ/G2L SoC.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> RFC v2 -> v1
> * Fixed review comments pointed by Rob and Jacopo.

Thanks for the update!

> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> @@ -0,0 +1,149 @@

> +  resets:
> +    items:
> +      - description: CRU_CMN_RSTB reset terminal
> +
> +  reset-names:
> +    const: cmn-rstb

While it doesn't hurt to always have reset-names, you may want to drop
it, as there is only a single reset.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Lad, Prabhakar Aug. 19, 2022, 11:37 a.m. UTC | #4 
Hi Geert,

Thank you for the review.

On Thu, Aug 18, 2022 at 9:56 AM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>
> Hi Prabhakar,
>
> On Mon, Aug 1, 2022 at 11:47 PM Lad Prabhakar
> <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> > Document the CSI-2 block which is part of CRU found in Renesas
> > RZ/G2L SoC.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> > RFC v2 -> v1
> > * Fixed review comments pointed by Rob and Jacopo.
>
> Thanks for the update!
>
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> > @@ -0,0 +1,149 @@
>
> > +  resets:
> > +    items:
> > +      - description: CRU_CMN_RSTB reset terminal
> > +
> > +  reset-names:
> > +    const: cmn-rstb
>
> While it doesn't hurt to always have reset-names, you may want to drop
> it, as there is only a single reset.
>
Agreed, I will drop it.

Cheers,
Prabhakar
Laurent Pinchart Aug. 29, 2022, 11:32 p.m. UTC | #5 
Hi Prabhakar,

Thank you for the patch.

On Mon, Aug 01, 2022 at 10:47:15PM +0100, Lad Prabhakar wrote:
> Document the CSI-2 block which is part of CRU found in Renesas
> RZ/G2L SoC.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> RFC v2 -> v1
> * Fixed review comments pointed by Rob and Jacopo.
> 
> RFC v1 -> RFC v2
> * New patch
> ---
>  .../bindings/media/renesas,rzg2l-csi2.yaml    | 149 ++++++++++++++++++
>  1 file changed, 149 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> new file mode 100644
> index 000000000000..f82f88c096df
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> @@ -0,0 +1,149 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright (C) 2022 Renesas Electronics Corp.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/renesas,rzg2l-csi2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas RZ/G2L (and alike SoC's) MIPI CSI-2 receiver
> +
> +maintainers:
> +  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> +
> +description:
> +  The CSI-2 receiver device provides MIPI CSI-2 capabilities for the Renesas RZ/G2L
> +  (and alike SoCs). MIPI CSI-2 is part of the CRU block which is used in conjunction
> +  with the Image Processing module, which provides the video capture capabilities.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:

You can drop the oneOf and write

    items:
      - enum:
          - renesas,r9a07g044-csi2       # RZ/G2{L,LC}
          - renesas,r9a07g054-csi2       # RZ/V2L
      - const: renesas,rzg2l-csi2

> +          - enum:
> +              - renesas,r9a07g044-csi2       # RZ/G2{L,LC}
> +              - renesas,r9a07g054-csi2       # RZ/V2L
> +          - const: renesas,rzg2l-csi2
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-names:
> +    const: csi2_link

If there's a single interrupt you can drop the name.

> +
> +  clocks:
> +    items:
> +      - description: Internal clock for connecting CRU and MIPI
> +      - description: CRU Main clock
> +      - description: CPU Register access clock
> +
> +  clock-names:
> +    items:
> +      - const: sysclk
> +      - const: vclk
> +      - const: pclk
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  resets:
> +    items:
> +      - description: CRU_CMN_RSTB reset terminal
> +
> +  reset-names:
> +    const: cmn-rstb

Same here.

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port node, single endpoint describing the CSI-2 transmitter.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +                items:
> +                  maximum: 4
> +
> +            required:
> +              - clock-lanes
> +              - data-lanes
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output port node, Image Processing block connected to the CSI-2 receiver.
> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - resets
> +  - reset-names
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/r9a07g044-cpg.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    csi20: csi2@10830400 {
> +            compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2";
> +            reg = <0x10830400 0xfc00>;
> +            interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
> +            clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>,
> +                     <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
> +                     <&cpg CPG_MOD R9A07G044_CRU_PCLK>;
> +            clock-names = "sysclk", "vclk", "pclk";
> +            power-domains = <&cpg>;
> +            resets = <&cpg R9A07G044_CRU_CMN_RSTB>;
> +            reset-names = "cmn-rstb";
> +
> +            ports {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +
> +                    port@0 {
> +                            reg = <0>;
> +
> +                            csi2_in: endpoint {
> +                                    clock-lanes = <0>;
> +                                    data-lanes = <1 2>;
> +                                    remote-endpoint = <&ov5645_ep>;
> +                            };
> +                    };
> +
> +                    port@1 {
> +                            #address-cells = <1>;
> +                            #size-cells = <0>;
> +
> +                            reg = <1>;
> +
> +                            csi2cru: endpoint@0 {
> +                                    reg = <0>;
> +                                    remote-endpoint = <&crucsi2>;
> +                            };
> +                    };
> +            };
> +    };
Lad, Prabhakar Aug. 30, 2022, 11:10 a.m. UTC | #6 
Hi Laurent,

Thank you for the patch.

On Tue, Aug 30, 2022 at 12:32 AM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Prabhakar,
>
> Thank you for the patch.
>
> On Mon, Aug 01, 2022 at 10:47:15PM +0100, Lad Prabhakar wrote:
> > Document the CSI-2 block which is part of CRU found in Renesas
> > RZ/G2L SoC.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> > RFC v2 -> v1
> > * Fixed review comments pointed by Rob and Jacopo.
> >
> > RFC v1 -> RFC v2
> > * New patch
> > ---
> >  .../bindings/media/renesas,rzg2l-csi2.yaml    | 149 ++++++++++++++++++
> >  1 file changed, 149 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> > new file mode 100644
> > index 000000000000..f82f88c096df
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
> > @@ -0,0 +1,149 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +# Copyright (C) 2022 Renesas Electronics Corp.
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/renesas,rzg2l-csi2.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Renesas RZ/G2L (and alike SoC's) MIPI CSI-2 receiver
> > +
> > +maintainers:
> > +  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > +
> > +description:
> > +  The CSI-2 receiver device provides MIPI CSI-2 capabilities for the Renesas RZ/G2L
> > +  (and alike SoCs). MIPI CSI-2 is part of the CRU block which is used in conjunction
> > +  with the Image Processing module, which provides the video capture capabilities.
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - items:
>
> You can drop the oneOf and write
>
Agreed.

>     items:
>       - enum:
>           - renesas,r9a07g044-csi2       # RZ/G2{L,LC}
>           - renesas,r9a07g054-csi2       # RZ/V2L
>       - const: renesas,rzg2l-csi2
>
> > +          - enum:
> > +              - renesas,r9a07g044-csi2       # RZ/G2{L,LC}
> > +              - renesas,r9a07g054-csi2       # RZ/V2L
> > +          - const: renesas,rzg2l-csi2
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  interrupt-names:
> > +    const: csi2_link
>
> If there's a single interrupt you can drop the name.
>
OK, I will drop it.

Cheers,
Prabhakar

> > +
> > +  clocks:
> > +    items:
> > +      - description: Internal clock for connecting CRU and MIPI
> > +      - description: CRU Main clock
> > +      - description: CPU Register access clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: sysclk
> > +      - const: vclk
> > +      - const: pclk
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  resets:
> > +    items:
> > +      - description: CRU_CMN_RSTB reset terminal
> > +
> > +  reset-names:
> > +    const: cmn-rstb
>
> Same here.
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
>
> > +
> > +  ports:
> > +    $ref: /schemas/graph.yaml#/properties/ports
> > +
> > +    properties:
> > +      port@0:
> > +        $ref: /schemas/graph.yaml#/$defs/port-base
> > +        unevaluatedProperties: false
> > +        description:
> > +          Input port node, single endpoint describing the CSI-2 transmitter.
> > +
> > +        properties:
> > +          endpoint:
> > +            $ref: video-interfaces.yaml#
> > +            unevaluatedProperties: false
> > +
> > +            properties:
> > +              data-lanes:
> > +                minItems: 1
> > +                maxItems: 4
> > +                items:
> > +                  maximum: 4
> > +
> > +            required:
> > +              - clock-lanes
> > +              - data-lanes
> > +
> > +      port@1:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description:
> > +          Output port node, Image Processing block connected to the CSI-2 receiver.
> > +
> > +    required:
> > +      - port@0
> > +      - port@1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - clocks
> > +  - clock-names
> > +  - power-domains
> > +  - resets
> > +  - reset-names
> > +  - ports
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/r9a07g044-cpg.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +    csi20: csi2@10830400 {
> > +            compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2";
> > +            reg = <0x10830400 0xfc00>;
> > +            interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
> > +            clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>,
> > +                     <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
> > +                     <&cpg CPG_MOD R9A07G044_CRU_PCLK>;
> > +            clock-names = "sysclk", "vclk", "pclk";
> > +            power-domains = <&cpg>;
> > +            resets = <&cpg R9A07G044_CRU_CMN_RSTB>;
> > +            reset-names = "cmn-rstb";
> > +
> > +            ports {
> > +                    #address-cells = <1>;
> > +                    #size-cells = <0>;
> > +
> > +                    port@0 {
> > +                            reg = <0>;
> > +
> > +                            csi2_in: endpoint {
> > +                                    clock-lanes = <0>;
> > +                                    data-lanes = <1 2>;
> > +                                    remote-endpoint = <&ov5645_ep>;
> > +                            };
> > +                    };
> > +
> > +                    port@1 {
> > +                            #address-cells = <1>;
> > +                            #size-cells = <0>;
> > +
> > +                            reg = <1>;
> > +
> > +                            csi2cru: endpoint@0 {
> > +                                    reg = <0>;
> > +                                    remote-endpoint = <&crucsi2>;
> > +                            };
> > +                    };
> > +            };
> > +    };
>
> --
> Regards,
>
> Laurent Pinchart
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
new file mode 100644
index 000000000000..f82f88c096df
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
@@ -0,0 +1,149 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,rzg2l-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L (and alike SoC's) MIPI CSI-2 receiver
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+  The CSI-2 receiver device provides MIPI CSI-2 capabilities for the Renesas RZ/G2L
+  (and alike SoCs). MIPI CSI-2 is part of the CRU block which is used in conjunction
+  with the Image Processing module, which provides the video capture capabilities.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g044-csi2       # RZ/G2{L,LC}
+              - renesas,r9a07g054-csi2       # RZ/V2L
+          - const: renesas,rzg2l-csi2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: csi2_link
+
+  clocks:
+    items:
+      - description: Internal clock for connecting CRU and MIPI
+      - description: CRU Main clock
+      - description: CPU Register access clock
+
+  clock-names:
+    items:
+      - const: sysclk
+      - const: vclk
+      - const: pclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: CRU_CMN_RSTB reset terminal
+
+  reset-names:
+    const: cmn-rstb
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the CSI-2 transmitter.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+                items:
+                  maximum: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port node, Image Processing block connected to the CSI-2 receiver.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    csi20: csi2@10830400 {
+            compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2";
+            reg = <0x10830400 0xfc00>;
+            interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>,
+                     <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
+                     <&cpg CPG_MOD R9A07G044_CRU_PCLK>;
+            clock-names = "sysclk", "vclk", "pclk";
+            power-domains = <&cpg>;
+            resets = <&cpg R9A07G044_CRU_CMN_RSTB>;
+            reset-names = "cmn-rstb";
+
+            ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                            reg = <0>;
+
+                            csi2_in: endpoint {
+                                    clock-lanes = <0>;
+                                    data-lanes = <1 2>;
+                                    remote-endpoint = <&ov5645_ep>;
+                            };
+                    };
+
+                    port@1 {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            reg = <1>;
+
+                            csi2cru: endpoint@0 {
+                                    reg = <0>;
+                                    remote-endpoint = <&crucsi2>;
+                            };
+                    };
+            };
+    };