[v4,11/11] media: dt-bindings: Convert Cadence CSI2RX binding to YAML
Commit Message
Convert the Cadence CSI2RX binding to use YAML schema.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
---
Changes in v4:
- Add power-domains property.
- Drop maxItems from clock-names.
- Drop the type for data-lanes.
- Drop uniqueItems from data-lanes. Move it to video-interfaces.yaml
instead.
Changes in v3:
- Add compatible: contains: const: cdns,csi2rx to allow SoC specific
compatible.
- Add more constraints for data-lanes property.
Changes in v2:
- New in v2.
.../devicetree/bindings/media/cdns,csi2rx.txt | 100 -----------
.../bindings/media/cdns,csi2rx.yaml | 169 ++++++++++++++++++
2 files changed, 169 insertions(+), 100 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.txt
create mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
Comments
On Wed, 15 Sep 2021 17:32:40 +0530, Pratyush Yadav wrote:
> Convert the Cadence CSI2RX binding to use YAML schema.
>
> Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
>
> ---
>
> Changes in v4:
> - Add power-domains property.
> - Drop maxItems from clock-names.
> - Drop the type for data-lanes.
> - Drop uniqueItems from data-lanes. Move it to video-interfaces.yaml
> instead.
>
> Changes in v3:
> - Add compatible: contains: const: cdns,csi2rx to allow SoC specific
> compatible.
> - Add more constraints for data-lanes property.
>
> Changes in v2:
> - New in v2.
>
> .../devicetree/bindings/media/cdns,csi2rx.txt | 100 -----------
> .../bindings/media/cdns,csi2rx.yaml | 169 ++++++++++++++++++
> 2 files changed, 169 insertions(+), 100 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.txt
> create mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
>
Reviewed-by: Rob Herring <robh@kernel.org>
Hi Pratyush,
Thank you for the patch.
On Wed, Sep 15, 2021 at 05:32:40PM +0530, Pratyush Yadav wrote:
> Convert the Cadence CSI2RX binding to use YAML schema.
>
> Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
>
> ---
>
> Changes in v4:
> - Add power-domains property.
> - Drop maxItems from clock-names.
> - Drop the type for data-lanes.
> - Drop uniqueItems from data-lanes. Move it to video-interfaces.yaml
> instead.
>
> Changes in v3:
> - Add compatible: contains: const: cdns,csi2rx to allow SoC specific
> compatible.
> - Add more constraints for data-lanes property.
>
> Changes in v2:
> - New in v2.
>
> .../devicetree/bindings/media/cdns,csi2rx.txt | 100 -----------
> .../bindings/media/cdns,csi2rx.yaml | 169 ++++++++++++++++++
> 2 files changed, 169 insertions(+), 100 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.txt
> create mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/cdns,csi2rx.txt b/Documentation/devicetree/bindings/media/cdns,csi2rx.txt
> deleted file mode 100644
> index 6b02a0657ad9..000000000000
> --- a/Documentation/devicetree/bindings/media/cdns,csi2rx.txt
> +++ /dev/null
> @@ -1,100 +0,0 @@
> -Cadence MIPI-CSI2 RX controller
> -===============================
> -
> -The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI
> -lanes in input, and 4 different pixel streams in output.
> -
> -Required properties:
> - - compatible: must be set to "cdns,csi2rx" and an SoC-specific compatible
> - - reg: base address and size of the memory mapped region
> - - clocks: phandles to the clocks driving the controller
> - - clock-names: must contain:
> - * sys_clk: main clock
> - * p_clk: register bank clock
> - * pixel_if[0-3]_clk: pixel stream output clock, one for each stream
> - implemented in hardware, between 0 and 3
> -
> -Optional properties:
> - - phys: phandle to the external D-PHY, phy-names must be provided
> - - phy-names: must contain "dphy", if the implementation uses an
> - external D-PHY
> -
> -Required subnodes:
> - - ports: A ports node with one port child node per device input and output
> - port, in accordance with the video interface bindings defined in
> - Documentation/devicetree/bindings/media/video-interfaces.txt. The
> - port nodes are numbered as follows:
> -
> - Port Description
> - -----------------------------
> - 0 CSI-2 input
> - 1 Stream 0 output
> - 2 Stream 1 output
> - 3 Stream 2 output
> - 4 Stream 3 output
> -
> - The stream output port nodes are optional if they are not
> - connected to anything at the hardware level or implemented
> - in the design.Since there is only one endpoint per port,
> - the endpoints are not numbered.
> -
> -
> -Example:
> -
> -csi2rx: csi-bridge@0d060000 {
> - compatible = "cdns,csi2rx";
> - reg = <0x0d060000 0x1000>;
> - clocks = <&byteclock>, <&byteclock>
> - <&coreclock>, <&coreclock>,
> - <&coreclock>, <&coreclock>;
> - clock-names = "sys_clk", "p_clk",
> - "pixel_if0_clk", "pixel_if1_clk",
> - "pixel_if2_clk", "pixel_if3_clk";
> -
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port@0 {
> - reg = <0>;
> -
> - csi2rx_in_sensor: endpoint {
> - remote-endpoint = <&sensor_out_csi2rx>;
> - clock-lanes = <0>;
> - data-lanes = <1 2>;
> - };
> - };
> -
> - port@1 {
> - reg = <1>;
> -
> - csi2rx_out_grabber0: endpoint {
> - remote-endpoint = <&grabber0_in_csi2rx>;
> - };
> - };
> -
> - port@2 {
> - reg = <2>;
> -
> - csi2rx_out_grabber1: endpoint {
> - remote-endpoint = <&grabber1_in_csi2rx>;
> - };
> - };
> -
> - port@3 {
> - reg = <3>;
> -
> - csi2rx_out_grabber2: endpoint {
> - remote-endpoint = <&grabber2_in_csi2rx>;
> - };
> - };
> -
> - port@4 {
> - reg = <4>;
> -
> - csi2rx_out_grabber3: endpoint {
> - remote-endpoint = <&grabber3_in_csi2rx>;
> - };
> - };
> - };
> -};
> diff --git a/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
> new file mode 100644
> index 000000000000..fbd7f0503832
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
> @@ -0,0 +1,169 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/cdns,csi2rx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Cadence MIPI-CSI2 RX controller
> +
> +description: |
> + The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI
> + lanes in input, and 4 different pixel streams in output.
> +
> +maintainers:
> + - Pratyush Yadav <p.yadav@ti.com>
> +
> +properties:
> + compatible:
> + contains:
> + const: cdns,csi2rx
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + minItems: 3
> + maxItems: 6
The comments in clock-names can be moved here with
clocks:
minItems: 3
items:
- description: Main clock
- description: Register bank clock
- description: Rixel stream 0 output clock
- description: Rixel stream 1 output clock
- description: Rixel stream 2 output clock
- description: Rixel stream 3 output clock
> +
> + clock-names:
> + minItems: 3
> + items:
> + - const: sys_clk # main clock
> + - const: p_clk # register bank clock
> + - const: pixel_if0_clk # pixel stream 0 output clock
> + - const: pixel_if1_clk # pixel stream 1 output clock
> + - const: pixel_if2_clk # pixel stream 2 output clock
> + - const: pixel_if3_clk # pixel stream 3 output clock
> +
> + phys:
> + maxItems: 1
> + description: phandle to the external D-PHY
> +
> + phy-names:
> + items:
> + - const: dphy
> +
> + power-domains:
> + maxItems: 1
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: CSI-2 input
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + clock-lanes:
> + maxItems: 1
> +
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> + items:
> + maximum: 4
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: Stream 0 output
> +
> + port@2:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: Stream 1 output
> +
> + port@3:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: Stream 2 output
> +
> + port@4:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: Stream 3 output
> +
> + required:
> + - port@0
> +
> +
> +dependencies:
> + phys: [ 'phy-names' ]
> + phy-names: [ 'phys' ]
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
Shouldn't "ports" be required too ?
With those comments addressed,
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + csi2rx: csi-bridge@d060000 {
> + compatible = "cdns,csi2rx";
> + reg = <0x0d060000 0x1000>;
> + clocks = <&byteclock>, <&byteclock>,
> + <&coreclock>, <&coreclock>,
> + <&coreclock>, <&coreclock>;
> + clock-names = "sys_clk", "p_clk",
> + "pixel_if0_clk", "pixel_if1_clk",
> + "pixel_if2_clk", "pixel_if3_clk";
> + phys = <&dphy0>;
> + phy-names = "dphy";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + csi2rx_in_sensor: endpoint {
> + remote-endpoint = <&sensor_out_csi2rx>;
> + clock-lanes = <0>;
> + data-lanes = <1 2>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + csi2rx_out_grabber0: endpoint {
> + remote-endpoint = <&grabber0_in_csi2rx>;
> + };
> + };
> +
> + port@2 {
> + reg = <2>;
> +
> + csi2rx_out_grabber1: endpoint {
> + remote-endpoint = <&grabber1_in_csi2rx>;
> + };
> + };
> +
> + port@3 {
> + reg = <3>;
> +
> + csi2rx_out_grabber2: endpoint {
> + remote-endpoint = <&grabber2_in_csi2rx>;
> + };
> + };
> +
> + port@4 {
> + reg = <4>;
> +
> + csi2rx_out_grabber3: endpoint {
> + remote-endpoint = <&grabber3_in_csi2rx>;
> + };
> + };
> + };
> + };
On 07/10/21 02:54AM, Laurent Pinchart wrote:
> Hi Pratyush,
>
> Thank you for the patch.
>
> On Wed, Sep 15, 2021 at 05:32:40PM +0530, Pratyush Yadav wrote:
[...]
> > + ports:
> > + $ref: /schemas/graph.yaml#/properties/ports
> > +
> > + properties:
> > + port@0:
> > + $ref: /schemas/graph.yaml#/$defs/port-base
> > + unevaluatedProperties: false
> > + description: CSI-2 input
> > +
> > + properties:
> > + endpoint:
> > + $ref: video-interfaces.yaml#
> > + unevaluatedProperties: false
> > +
> > + properties:
> > + clock-lanes:
> > + maxItems: 1
> > +
> > + data-lanes:
> > + minItems: 1
> > + maxItems: 4
> > + items:
> > + maximum: 4
> > +
> > + required:
> > + - clock-lanes
> > + - data-lanes
> > +
> > + port@1:
> > + $ref: /schemas/graph.yaml#/properties/port
> > + description: Stream 0 output
> > +
> > + port@2:
> > + $ref: /schemas/graph.yaml#/properties/port
> > + description: Stream 1 output
> > +
> > + port@3:
> > + $ref: /schemas/graph.yaml#/properties/port
> > + description: Stream 2 output
> > +
> > + port@4:
> > + $ref: /schemas/graph.yaml#/properties/port
> > + description: Stream 3 output
> > +
> > + required:
> > + - port@0
> > +
> > +
> > +dependencies:
> > + phys: [ 'phy-names' ]
> > + phy-names: [ 'phys' ]
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - clocks
> > + - clock-names
>
> Shouldn't "ports" be required too ?
Yes, it should be. Will fix. Thanks.
>
> With those comments addressed,
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
deleted file mode 100644
@@ -1,100 +0,0 @@
-Cadence MIPI-CSI2 RX controller
-===============================
-
-The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI
-lanes in input, and 4 different pixel streams in output.
-
-Required properties:
- - compatible: must be set to "cdns,csi2rx" and an SoC-specific compatible
- - reg: base address and size of the memory mapped region
- - clocks: phandles to the clocks driving the controller
- - clock-names: must contain:
- * sys_clk: main clock
- * p_clk: register bank clock
- * pixel_if[0-3]_clk: pixel stream output clock, one for each stream
- implemented in hardware, between 0 and 3
-
-Optional properties:
- - phys: phandle to the external D-PHY, phy-names must be provided
- - phy-names: must contain "dphy", if the implementation uses an
- external D-PHY
-
-Required subnodes:
- - ports: A ports node with one port child node per device input and output
- port, in accordance with the video interface bindings defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt. The
- port nodes are numbered as follows:
-
- Port Description
- -----------------------------
- 0 CSI-2 input
- 1 Stream 0 output
- 2 Stream 1 output
- 3 Stream 2 output
- 4 Stream 3 output
-
- The stream output port nodes are optional if they are not
- connected to anything at the hardware level or implemented
- in the design.Since there is only one endpoint per port,
- the endpoints are not numbered.
-
-
-Example:
-
-csi2rx: csi-bridge@0d060000 {
- compatible = "cdns,csi2rx";
- reg = <0x0d060000 0x1000>;
- clocks = <&byteclock>, <&byteclock>
- <&coreclock>, <&coreclock>,
- <&coreclock>, <&coreclock>;
- clock-names = "sys_clk", "p_clk",
- "pixel_if0_clk", "pixel_if1_clk",
- "pixel_if2_clk", "pixel_if3_clk";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- csi2rx_in_sensor: endpoint {
- remote-endpoint = <&sensor_out_csi2rx>;
- clock-lanes = <0>;
- data-lanes = <1 2>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- csi2rx_out_grabber0: endpoint {
- remote-endpoint = <&grabber0_in_csi2rx>;
- };
- };
-
- port@2 {
- reg = <2>;
-
- csi2rx_out_grabber1: endpoint {
- remote-endpoint = <&grabber1_in_csi2rx>;
- };
- };
-
- port@3 {
- reg = <3>;
-
- csi2rx_out_grabber2: endpoint {
- remote-endpoint = <&grabber2_in_csi2rx>;
- };
- };
-
- port@4 {
- reg = <4>;
-
- csi2rx_out_grabber3: endpoint {
- remote-endpoint = <&grabber3_in_csi2rx>;
- };
- };
- };
-};
new file mode 100644
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cdns,csi2rx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence MIPI-CSI2 RX controller
+
+description: |
+ The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI
+ lanes in input, and 4 different pixel streams in output.
+
+maintainers:
+ - Pratyush Yadav <p.yadav@ti.com>
+
+properties:
+ compatible:
+ contains:
+ const: cdns,csi2rx
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 3
+ maxItems: 6
+
+ clock-names:
+ minItems: 3
+ items:
+ - const: sys_clk # main clock
+ - const: p_clk # register bank clock
+ - const: pixel_if0_clk # pixel stream 0 output clock
+ - const: pixel_if1_clk # pixel stream 1 output clock
+ - const: pixel_if2_clk # pixel stream 2 output clock
+ - const: pixel_if3_clk # pixel stream 3 output clock
+
+ phys:
+ maxItems: 1
+ description: phandle to the external D-PHY
+
+ phy-names:
+ items:
+ - const: dphy
+
+ power-domains:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI-2 input
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+ items:
+ maximum: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Stream 0 output
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Stream 1 output
+
+ port@3:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Stream 2 output
+
+ port@4:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Stream 3 output
+
+ required:
+ - port@0
+
+
+dependencies:
+ phys: [ 'phy-names' ]
+ phy-names: [ 'phys' ]
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ csi2rx: csi-bridge@d060000 {
+ compatible = "cdns,csi2rx";
+ reg = <0x0d060000 0x1000>;
+ clocks = <&byteclock>, <&byteclock>,
+ <&coreclock>, <&coreclock>,
+ <&coreclock>, <&coreclock>;
+ clock-names = "sys_clk", "p_clk",
+ "pixel_if0_clk", "pixel_if1_clk",
+ "pixel_if2_clk", "pixel_if3_clk";
+ phys = <&dphy0>;
+ phy-names = "dphy";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csi2rx_in_sensor: endpoint {
+ remote-endpoint = <&sensor_out_csi2rx>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ csi2rx_out_grabber0: endpoint {
+ remote-endpoint = <&grabber0_in_csi2rx>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ csi2rx_out_grabber1: endpoint {
+ remote-endpoint = <&grabber1_in_csi2rx>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ csi2rx_out_grabber2: endpoint {
+ remote-endpoint = <&grabber2_in_csi2rx>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+
+ csi2rx_out_grabber3: endpoint {
+ remote-endpoint = <&grabber3_in_csi2rx>;
+ };
+ };
+ };
+ };