@@ -534,6 +534,15 @@ config VIDEO_AS3645A
This is a driver for the AS3645A and LM3555 flash controllers. It has
build in control for flash, torch and indicator LEDs.
+comment "Lens controllers"
+
+config VIDEO_AD5820
+ tristate "AD5820/AD5821/AD5398 lens voice coil support"
+ depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
+ ---help---
+ This is a driver for the AD5820/AD5821/AD5398 camera lens voice coil.
+ It is used for example in Nokia RX51.
+
comment "Video improvement chips"
config VIDEO_UPD64031A
@@ -58,6 +58,7 @@ obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o
obj-$(CONFIG_VIDEO_NOON010PC30) += noon010pc30.o
obj-$(CONFIG_VIDEO_S5K6AA) += s5k6aa.o
obj-$(CONFIG_VIDEO_S5K4ECGX) += s5k4ecgx.o
+obj-$(CONFIG_VIDEO_AD5820) += ad5820.o
obj-$(CONFIG_VIDEO_ADP1653) += adp1653.o
obj-$(CONFIG_VIDEO_AS3645A) += as3645a.o
obj-$(CONFIG_VIDEO_SMIAPP_PLL) += smiapp-pll.o
new file mode 100644
@@ -0,0 +1,561 @@
+/*
+ * AD5820/AD5821/AD5398 DAC driver for camera voice coil focus.
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2007 Texas Instruments
+ *
+ * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ * Sakari Ailus <sakari.ailus@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include <media/ad5820.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+
+/* Register definitions */
+#define AD5820_POWER_DOWN (1 << 15)
+#define AD5820_DAC_SHIFT 4
+#define AD5820_RAMP_MODE_LINEAR (0 << 3)
+#define AD5820_RAMP_MODE_64_16 (1 << 3)
+
+#define CODE_TO_RAMP_US(s) ((s) == 0 ? 0 : (1 << ((s) - 1)) * 50)
+#define RAMP_US_TO_CODE(c) fls(((c) + ((c)>>1)) / 50)
+
+struct ad5820_current_data_format {
+ int id;
+ int current_bits;
+ int current_offset;
+ int min_uA;
+ int max_uA;
+};
+
+struct ad5820_device {
+ struct v4l2_subdev subdev;
+
+ struct regulator *vana;
+ int xshutdown;
+
+ struct v4l2_ctrl_handler ctrls;
+ u32 focus_absolute;
+ u32 focus_ramp_time;
+ u32 focus_ramp_mode;
+
+ struct mutex power_lock;
+ int power_count;
+
+ int standby:1;
+
+ struct ad5820_current_data_format *data_format;
+};
+
+#define to_ad5820_device(sd) container_of(sd, struct ad5820_device, subdev)
+
+/**
+ * @brief I2C write using i2c_transfer().
+ * @param coil - the driver data structure
+ * @param data - register value to be written
+ * @returns nonnegative on success, negative if failed
+ */
+static int ad5820_write(struct ad5820_device *coil, u16 data)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&coil->subdev);
+ unsigned short val;
+ int ret;
+
+ if (!client || !client->adapter)
+ return -ENODEV;
+
+ val = cpu_to_be16(data);
+ ret = i2c_master_send(client, (char *)&val, 2);
+ if (ret < 0) {
+ dev_err(&client->dev, "write failed, error %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * @brief I2C read using i2c_transfer().
+ * @param coil - the driver data structure
+ * @returns unsigned 16-bit register value on success, negative if failed
+ */
+static int ad5820_read(struct ad5820_device *coil)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&coil->subdev);
+ int ret;
+ u16 data = 0;
+
+ if (!client || !client->adapter)
+ return -ENODEV;
+
+ ret = i2c_master_recv(client, (char *)&data, 2);
+ if (ret < 0) {
+ dev_err(&client->dev, "read failed, error %d\n", ret);
+ return ret;
+ }
+
+ return be16_to_cpu(data);
+}
+
+/* Calculate status word and write it to the device based on current
+ * values of V4L2 controls. It is assumed that the stored V4L2 control
+ * values are properly limited and rounded. */
+static int ad5820_update_hw(struct ad5820_device *coil)
+{
+ u16 status;
+
+ /* extended features for ad5820*/
+ if (coil->data_format->id == AD5820_ID) {
+ status = RAMP_US_TO_CODE(coil->focus_ramp_time);
+ status |= coil->focus_ramp_mode
+ ? AD5820_RAMP_MODE_64_16 : AD5820_RAMP_MODE_LINEAR;
+ }
+
+ status |= coil->focus_absolute << coil->data_format->current_offset;
+
+ if (coil->standby)
+ status |= AD5820_POWER_DOWN;
+
+ return ad5820_write(coil, status);
+}
+
+/* --------------------------------------------------------------------------
+ * Power handling
+ */
+static void ad5820_power_off(struct ad5820_device *coil)
+{
+ if (coil->xshutdown != -1)
+ gpio_set_value(coil->xshutdown, 0);
+
+ if (coil->vana)
+ regulator_disable(coil->vana);
+}
+
+static int ad5820_power_on(struct ad5820_device *coil)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&coil->subdev);
+ int ret = 0;
+
+ if (coil->vana)
+ ret = regulator_enable(coil->vana);
+
+ if (ret < 0) {
+ dev_err(&client->dev, "regulator_enable failed %d\n", ret);
+ return ret;
+ }
+
+ if (coil->xshutdown != -1)
+ gpio_set_value(coil->xshutdown, 1);
+
+ return 0;
+}
+
+/* --------------------------------------------------------------------------
+ * V4L2 controls
+ */
+
+#define V4L2_CID_FOCUS_AD5820_RAMP_TIME (V4L2_CID_USER_BASE | 0x1000)
+#define V4L2_CID_FOCUS_AD5820_RAMP_MODE (V4L2_CID_USER_BASE | 0x1001)
+
+static int ad5820_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct ad5820_device *coil =
+ container_of(ctrl->handler, struct ad5820_device, ctrls);
+ u32 code;
+ int r = 0;
+
+ switch (ctrl->id) {
+ case V4L2_CID_FOCUS_ABSOLUTE:
+ coil->focus_absolute = ctrl->val;
+ return ad5820_update_hw(coil);
+
+ case V4L2_CID_FOCUS_AD5820_RAMP_TIME:
+ code = RAMP_US_TO_CODE(ctrl->val);
+ ctrl->val = CODE_TO_RAMP_US(code);
+ coil->focus_ramp_time = ctrl->val;
+ break;
+
+ case V4L2_CID_FOCUS_AD5820_RAMP_MODE:
+ coil->focus_ramp_mode = ctrl->val;
+ break;
+ }
+
+ return r;
+}
+
+static const struct v4l2_ctrl_ops ad5820_ctrl_ops = {
+ .s_ctrl = ad5820_set_ctrl,
+};
+
+static const char * const ad5820_focus_menu[] = {
+ "Linear ramp",
+ "64/16 ramp",
+};
+
+static const struct v4l2_ctrl_config ad5820_ctrls[] = {
+ {
+ .ops = &ad5820_ctrl_ops,
+ .id = V4L2_CID_FOCUS_AD5820_RAMP_TIME,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Focus ramping time [us]",
+ .min = 0,
+ .max = 3200,
+ .step = 50,
+ .def = 0,
+ .flags = 0,
+ },
+ {
+ .ops = &ad5820_ctrl_ops,
+ .id = V4L2_CID_FOCUS_AD5820_RAMP_MODE,
+ .type = V4L2_CTRL_TYPE_MENU,
+ .name = "Focus ramping mode",
+ .min = 0,
+ .max = ARRAY_SIZE(ad5820_focus_menu),
+ .step = 0,
+ .def = 0,
+ .flags = 0,
+ .qmenu = ad5820_focus_menu,
+ },
+};
+
+/* --------------------------------------------------------------------------
+ * V4L2 subdev operations
+ */
+
+static int __ad5820_set_power(struct ad5820_device *coil, bool on)
+{
+ int ret;
+
+ if (!on) {
+ /* Go to standby first as real power off my be denied by the
+ * hardware (single power line control for both coil and
+ * sensor).
+ */
+ coil->standby = 1;
+ ad5820_update_hw(coil);
+ ad5820_power_off(coil);
+ return 0;
+ }
+
+ ret = ad5820_power_on(coil);
+ if (ret < 0)
+ return ret;
+
+ /* Restore the hardware settings. */
+ coil->standby = 0;
+ ret = ad5820_update_hw(coil);
+ if (ret < 0) {
+ coil->standby = 1;
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ad5820_set_power(struct v4l2_subdev *subdev, int on)
+{
+ struct ad5820_device *coil = to_ad5820_device(subdev);
+ int ret = 0;
+
+ mutex_lock(&coil->power_lock);
+
+ /* If the power count is modified from 0 to != 0 or from != 0 to 0,
+ * update the power state.
+ */
+ if (coil->power_count == !on) {
+ ret = __ad5820_set_power(coil, !!on);
+ if (ret < 0)
+ goto done;
+ }
+
+ /* Update the power count. */
+ coil->power_count += on ? 1 : -1;
+ WARN_ON(coil->power_count < 0);
+
+done:
+ mutex_unlock(&coil->power_lock);
+ return ret;
+}
+
+static int ad5820_detect(struct v4l2_subdev *subdev)
+{
+ struct ad5820_device *coil = to_ad5820_device(subdev);
+ struct i2c_client *client = v4l2_get_subdevdata(&coil->subdev);
+ const u16 status = AD5820_POWER_DOWN | 0x3ff0;
+ int ret;
+
+ if (ad5820_power_on(coil) < 0)
+ return -ENODEV;
+
+ if (ad5820_write(coil, status)) {
+ dev_err(&client->dev, "write failed\n");
+ ad5820_power_off(coil);
+ return -ENODEV;
+ }
+
+ ret = ad5820_read(coil);
+
+ if (ret < 0) {
+ dev_err(&client->dev, "read failed\n");
+ return -ENODEV;
+ }
+
+ if ((u16)ret != status) {
+ dev_err(&client->dev, "read not the expected value (%#x)\n",
+ ret);
+ ad5820_power_off(coil);
+ return -ENODEV;
+ }
+
+ ret = __ad5820_set_power(coil, false);
+ return ret;
+}
+
+static int ad5820_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ return ad5820_set_power(sd, 1);
+}
+
+static int ad5820_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ return ad5820_set_power(sd, 0);
+}
+
+static const struct v4l2_subdev_core_ops ad5820_core_ops = {
+ .s_power = ad5820_set_power,
+};
+
+static const struct v4l2_subdev_ops ad5820_ops = {
+ .core = &ad5820_core_ops,
+};
+
+static const struct v4l2_subdev_internal_ops ad5820_internal_ops = {
+ .registered = ad5820_detect,
+ .open = ad5820_open,
+ .close = ad5820_close,
+};
+
+/* --------------------------------------------------------------------------
+ * I2C driver
+ */
+#ifdef CONFIG_PM
+
+static int ad5820_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+ struct ad5820_device *coil = to_ad5820_device(subdev);
+
+ if (!coil->power_count)
+ return 0;
+
+ ad5820_power_off(coil);
+ return 0;
+}
+
+static int ad5820_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+ struct ad5820_device *coil = to_ad5820_device(subdev);
+
+ if (!coil->power_count)
+ return 0;
+
+ return __ad5820_set_power(coil, true);
+}
+
+#endif /* CONFIG_PM */
+
+static int ad5820_probe(struct i2c_client *client,
+ const struct i2c_device_id *devid)
+{
+ struct ad5820_platform_data *pdata = client->dev.platform_data;
+ struct ad5820_device *coil;
+ const struct ad5820_current_data_format *df =
+ (struct ad5820_current_data_format *)devid->driver_data;
+ unsigned int i;
+ int ret = -ENODEV;
+
+ coil = kzalloc(sizeof(*coil), GFP_KERNEL);
+ if (coil == NULL)
+ return -ENOMEM;
+
+ mutex_init(&coil->power_lock);
+ coil->focus_absolute = 0;
+ coil->focus_ramp_time = 0;
+ coil->focus_ramp_mode = 0;
+ coil->xshutdown = -1;
+ coil->data_format = df;
+
+ coil->vana = regulator_get(&client->dev, "VANA");
+ if (IS_ERR(coil->vana))
+ dev_warn(&client->dev, "could not get regulator for vana\n");
+
+ if (pdata && pdata->xshutdown != -1) {
+ ret = gpio_request_one(pdata->xshutdown, GPIOF_OUT_INIT_LOW,
+ "ad5820_xshutdown");
+ if (ret < 0)
+ goto done;
+
+ coil->xshutdown = pdata->xshutdown;
+ }
+
+ if (coil->data_format == NULL) {
+ dev_err(&client->dev,
+ "the i2c-driver must pass a data_format struct\n");
+ goto done;
+ }
+
+ v4l2_ctrl_handler_init(&coil->ctrls,
+ coil->data_format->id == AD5820_ID ?
+ (ARRAY_SIZE(ad5820_ctrls) + 1) : 1);
+
+ /* V4L2_CID_FOCUS_ABSOLUTE
+ *
+ * Minimum current is 0 mA, maximum is 100 mA or 120 mA, depending on
+ * the actual device used (AD5820/AD5821/AD5398). I.e for AD5820
+ * 1 code is equivalent to 100/1023 = 0.0978 mA.
+ * Nevertheless, we do not use [mA] for focus position, because it is
+ * meaningless for user. Meaningful would be to use focus distance or
+ * even its inverse, but since the driver doesn't have sufficiently
+ * knowledge to do the conversion, we will just use abstract codes here.
+ * In any case, smaller value = focus position farther from camera.
+ * The default zero value means focus at infinity, and also least
+ * current consumption.
+ */
+ v4l2_ctrl_new_std(&coil->ctrls, &ad5820_ctrl_ops,
+ V4L2_CID_FOCUS_ABSOLUTE, 0,
+ (1 << coil->data_format->current_bits) - 1, 1, 0);
+
+ /* V4L2_CID_FOCUS_AD5820_RAMP_TIME and
+ * V4L2_CID_FOCUS_AD5820_RAMP_MODE */
+ if (coil->data_format->id == AD5820_ID)
+ for (i = 0; i < ARRAY_SIZE(ad5820_ctrls); ++i)
+ v4l2_ctrl_new_custom(&coil->ctrls, &ad5820_ctrls[i],
+ NULL);
+
+ if (coil->ctrls.error) {
+ ret = coil->ctrls.error;
+ goto done;
+ }
+
+ coil->subdev.ctrl_handler = &coil->ctrls;
+
+ v4l2_i2c_subdev_init(&coil->subdev, client, &ad5820_ops);
+ coil->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ coil->subdev.internal_ops = &ad5820_internal_ops;
+
+ ret = media_entity_init(&coil->subdev.entity, 0, NULL, 0);
+ if (ret < 0)
+ goto done;
+
+ ret = 0;
+
+done:
+ if (ret < 0) {
+ v4l2_ctrl_handler_free(&coil->ctrls);
+ media_entity_cleanup(&coil->subdev.entity);
+
+ if (coil->xshutdown != -1)
+ gpio_free(coil->xshutdown);
+ if (coil->vana)
+ regulator_put(coil->vana);
+
+ kfree(coil);
+ }
+
+ return ret;
+}
+
+static int __exit ad5820_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+ struct ad5820_device *coil = to_ad5820_device(subdev);
+
+ v4l2_device_unregister_subdev(&coil->subdev);
+ v4l2_ctrl_handler_free(&coil->ctrls);
+ media_entity_cleanup(&coil->subdev.entity);
+
+ if (coil->xshutdown != -1)
+ gpio_free(coil->xshutdown);
+
+ if (coil->vana)
+ regulator_put(coil->vana);
+
+ kfree(coil);
+ return 0;
+}
+
+static const struct ad5820_current_data_format df_ad5820 = {
+ AD5820_ID,
+ 10,
+ 4,
+ 0,
+ 100000
+};
+
+static const struct ad5820_current_data_format df_ad5821 = {
+ AD5821_ID,
+ 10,
+ 4,
+ 0,
+ 120000
+};
+
+static const struct ad5820_current_data_format df_ad5398 = {
+ AD5398_ID,
+ 10,
+ 4,
+ 0,
+ 120000
+};
+
+static const struct i2c_device_id ad5820_id_table[] = {
+ { AD5820_NAME, (kernel_ulong_t)&df_ad5820 },
+ { AD5821_NAME, (kernel_ulong_t)&df_ad5821 },
+ { AD5398_NAME, (kernel_ulong_t)&df_ad5398 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ad5820_id_table);
+
+static SIMPLE_DEV_PM_OPS(ad5820_pm_ops, ad5820_suspend, ad5820_resume);
+
+static struct i2c_driver ad5820_i2c_driver = {
+ .driver = {
+ .name = AD5820_NAME,
+ .pm = &ad5820_pm_ops,
+ },
+ .probe = ad5820_probe,
+ .remove = __exit_p(ad5820_remove),
+ .id_table = ad5820_id_table,
+};
+
+module_i2c_driver(ad5820_i2c_driver);
+
+MODULE_AUTHOR("Tuukka Toivonen <tuukka.o.toivonen@nokia.com>");
+MODULE_AUTHOR("Florian Neuhaus <florian.neuhaus@reberinformatik.ch>");
+MODULE_DESCRIPTION("AD5820/AD5821/AD5398 camera lens driver");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,39 @@
+/*
+ * AD5820 DAC driver for camera voice coil focus.
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2007 Texas Instruments
+ *
+ * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ * Sakari Ailus <sakari.ailus@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __AD5820_H__
+#define __AD5820_H__
+
+#define AD5820_NAME "ad5820"
+#define AD5821_NAME "ad5821"
+#define AD5398_NAME "ad5398"
+
+#define AD5820_ID (1)
+#define AD5821_ID (2)
+#define AD5398_ID (3)
+
+#define AD5820_I2C_ADDR (0x18 >> 1)
+#define AD5821_I2C_ADDR (0x18 >> 1)
+#define AD5398_I2C_ADDR (0x18 >> 1)
+
+struct ad5820_platform_data {
+ int xshutdown;
+};
+
+#endif /* __AD5820_H__ */