diff mbox

media: rc: Add support to decode Remotes using NECx IR protocol

Message ID 1343283264-25367-1-git-send-email-kumarrav@codeaurora.org (mailing list archive)
State Accepted, archived
Headers

Commit Message

Ravi Kumar V July 26, 2012, 6:14 a.m. UTC 
  Some remotes use NECx IR protocol to send remote control key
events. Present nec decoder in rc framework is assuming to have 2
stop bits (pulse width of 560us & space width 5600us) in NECx, but in
reality NECx sends only pulse of 560us and space untill next frame.So
here we can ignore the space width in stop bit as it is variable.

Signed-off-by: Ravi Kumar V <kumarrav@codeaurora.org>
---
 drivers/media/rc/ir-nec-decoder.c |    6 +++++-
 1 files changed, 5 insertions(+), 1 deletions(-)
diff mbox

Patch

diff --git a/drivers/media/rc/ir-nec-decoder.c b/drivers/media/rc/ir-nec-decoder.c
index 3c9431a..a3fe1c8 100644
--- a/drivers/media/rc/ir-nec-decoder.c
+++ b/drivers/media/rc/ir-nec-decoder.c
@@ -149,6 +149,10 @@  static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev)
 			break;
 
 		data->state = STATE_TRAILER_SPACE;
+
+		if (data->is_nec_x)
+			goto rc_data;
+
 		return 0;
 
 	case STATE_TRAILER_SPACE:
@@ -157,7 +161,7 @@  static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev)
 
 		if (!geq_margin(ev.duration, NEC_TRAILER_SPACE, NEC_UNIT / 2))
 			break;
-
+rc_data:
 		address     = bitrev8((data->bits >> 24) & 0xff);
 		not_address = bitrev8((data->bits >> 16) & 0xff);
 		command	    = bitrev8((data->bits >>  8) & 0xff);